Mobile batteri-enheder

Cat MEC500

Cat® MEC500 Mobile Equipment Charger (mobil batterienhed) er udviklet specielt til brug i mineindustrien og er den første af sin slags. Enheden har en effekt på op til 500 kW og der kan trækkes 300-1.000 V (0-700 A) fra enheden. Hvis der er større strømforbrug kan flere enheder placeres parallelt. MEC500 kan oplades hurtigt og sikkert, hvor end det er nødvendigt. Batterienheden er konstrueret så solidt, at den kan modstå mindre stenskred (overholder ISO 2867). Samtidig overholder MEC500 IP66 (IEC standard 60529) og kan derfor fungere uden problemer i det ofte fugtige og støvede miljø man finder i en mine. Enheden er opbygget med lommer så den let kan flyttes med en gaffeltruck og den har påmonterede øjne, så den let kan hejses ned i minen.

Effekt 500 kW / 0-700 kVA

Strømudtag (V) 300-1.000

Certificeringer ISO 2867, IP66 (IEC standard 60529)

Built Tough

Rated to meet the IP66 standard, critical components are protected from both water and dust infiltration. The charger also meets ISO 2867 standards, offering protection from minor rockfalls.<br>Key components are Isolation mounted against vibration or seismic activity.

Fast charge

The MEC 500 offered high-power, fast Opportunity Charging where needed. ultrafast battery charging is achieved by connecting two units in parallel to charge the LHD in less than 20 minutes.

Mobile

Equipped with a durable skid mount and integrated forklift eyes, the charger is efficiently moved to where the equipment is working via towing or fork truck.

Specifikationer

Electrical Specifications

Rated Power (AC Input)	500 kW
Voltage Range (AC Input)	400-660 VAC
Frequency Range	50 or 60 Hz
Input Supply (AC Input)	3-Phase Insulated Terra (IT)
Voltage Output	300-1,000 VDC
Rated Current (DC Output)	700 Amps
Cable Output - Cat Proprietary Connector	700 Amp

Thermal Specifications

Ambient Operating Temperature Range	-25° to +50° C (-13° to 122° F)
Storage	-40° to +80° C (-40° to +176° F)

Charging Standards

Control Interface	CAN
Control Type	IEC 61851-23/24 (with CAN)
Compliance and Safety	CSA M421; UL2202 (under development)

Vikter

MEC500	1656 kg
MEC500 with Optional Skid	2037 kg

MEC500 Product Brochure

Complete MEC500 Product Brochure

Download (PDF)

Fordele og funktioner

Ultra-fast battery charging

300-1,000 Volt Output capable.
0-700 Amp Current Output capable.
Power up to 500 kW.
Ability to boost voltage to accommodate variable input voltages.
Adjustable output current for varying battery types/technologies.
May be paralleled with additional units for increased power capability.
3-Phase AC:DC active front end for four-quadrant input power control.
3-Phase interleaved DC:DC converter output for tight voltage control and minimum ripple current.

Built-in reliability

Capable of being dragged on its skid base – or lifted in a bucket or by forks. The unit can be lowered down a mine shaft using military-grade lift eyes.
Ready for high vibration, seismic and shock loading – the unit is isolation mounted to the skid base, and the Electronic Control Modules (ECM’s) are also iso mounted.
Rated to IP66 under IEC standard 60529, the MEC500 protects critical components from both dust and water, including doghouse sections where electrical input and output connections are made.
Built-ins: sealed air conditioning, dehumidification, an integrated Cat radiator, and two on-demand fans support cooling.
Designed to withstand the impact of minor rock falls meeting ISO 2867 standards.
Cat patented charging cable (available in lengths of 10 or 15 m/33 ft or 49 ft) is metal jacketed for extra mechanical and electrical protection.
Altitude capabilities of between 3600 m (11,800 ft) above ground, and 4500 m (14,700 ft) below ground.

Simple and safe to use

The charger performs a short circuit and insulation resistance check on the cable before energizing the output.
If charging the Cat R1700 XE LHD – all charging functions can be managed from the R1700 XE machine keypad. Auto-start can be configured to start charging once the connection has been made to the machine.
If charging alternate equipment – a simple 6-function keypad starts and stops the charger.
If a connector is pulled off without pushing the stop button, the charger will cycle through an emergency shutdown procedure.
An integrated display on the MEC500 simplifies diagnostics and troubleshooting. The R1700 XE charge port is constantly sensing temperature, voltage, and current to detect failures. Failures or faults are communicated to the operator through the display and audible warnings.
The battery-powered vehicle management system dictates to the MEC500 exactly what is needed. If the machine batteries need a 600 Amp charge – the MEC500 sends it 600 Amps. For convenience, the machine operator can monitor the charge cycle from inside the cab or from the display located on the MEC500.
The charger has built-in line insulation monitors on the AC input and DC output. When paralleled with multiple chargers, the line insulation monitors will automatically coordinate with each other to provide comprehensive and uninterrupted ground fault protection.
An isolation transformer is required and should be installed in close proximity to the charger.

Cat MEC500

Specifikationer

MEC500 Product Brochure

Fordele og funktioner

Cat MEC500

Få et tilbud

Cat MEC500 Mobile batteri-enheder